Arabol Cutting Oil

DESCRIPTION    


ARABOL Soluble Cutting Oil is blended from selective mineral base oils, emulsifier and high performance additives to provide a stable well dispersed milky emulsion with water. It is designed to perform well and foam stable emulsion in hard water. The emulsion formed is homogenous and does not split during usage on routine machine shut-downs, under normal conditions. It is designed to perform well and foam stable emulsion in hard water. 

Applications:

Soluble Cutting Oils are used where rapid heat removal is the major requirement. Soluble Cutting Oils are blended from mineral oils, emulsifiers, rust inhibitors, extreme pressure additives and other coupling agents.  

Applications include cutting, drilling, milling and grinding, where a general purpose coolant is required. ARABOL Cutting Oil is recommended for all machining operations, where cooling and rust protection are of prime importance. 

The product contains a biocide (anti-microbial agent). a heavy duty oil which contains extreme pressure additives for use in metal removal operations, where a high degree of surface finish and long tool life are desired. The product provides good rust protection and contains a biocide (anti-microbial agent).


PRODUCT FEATURES & BENEFITS

  • High emulsion stability, which gives greater economy resulting from lower replacement cost.

  • Good cooling and lubrication due to excellent wetting properties.  This results in less tool wear, greater accuracy and considerably longer tool life.

  • High microbiological resistance, resulting in significant biocide cost savings.

  • Excellent corrosion protection enabling greater dilution and therefore lower cutting fluid consumption.

  • Extraordinary pH stability resulting from its long lasting buffer components giving longer emulsion life, greater protection against corrosion and less cutting fluid consumption

  • Especially good skin compatibility

  • Suitable for use in individually filled machines as well as in central circulation systems, with which ferrous metals are machined.

  • It is free of nitrite, PTBB and other hazardous substances. The effectiveness of the biocide properties of the ingredients present in Water SOLUBLE. 

  • Avoids the uncontrolled growth of bacteria, yeast and fungi and thus reduces the microbiological hazards

  • Low foaming tendency.



Typical Specifications:

 

PROPERTIES

 

COLOUR AFTER EMULSIFICATION

MILKY WHITE

Specific Gravity @29.5°C

0.885 min

KINEMATIC VISCOSITY@ 40°C, MIN, cSt

22

FLASH POINT, (COG), DC, MIN

150

PH (5% EMULSION D/W)

9.2

COPPER CORROSION @ 100°C, 3HRS, MAX

1

CAST IRON CORROSION TEST, 20:1 EMULSION

0

WITH 400 PPM HARD WATER MAX

0/1-1

EMULSION TEST: 400 PPM HARD WATER,

0.1 ML OF OILAND 0.2 ML

5:1 AND 20:1 RATIO

CREAM MAX PERMITTED

 

(Above characteristics are mean values given as an information)

All reasonable care has been taken to ensure that the information provided here is accurate. However due to continual product development, the information contained herein is subjected to change without notification.